I own three Samsung SM825 SSDs (200GB). The SMART details I can pull off my FreeNAS system are as follows:
There are a number of attributes missing from this list. I don't see anything pertaining to written LBAs. Does anyone have any experience determining how much has been written to an SM825?
Code:
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 040 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 3301
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 280
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
173 Unknown_Attribute 0x0033 099 099 010 Pre-fail Always - 9
175 Program_Fail_Count_Chip 0x0033 100 100 010 Pre-fail Always - 0
180 Unused_Rsvd_Blk_Cnt_Tot 0x003b 100 100 090 Pre-fail Always - 0
194 Temperature_Celsius 0x0022 076 047 000 Old_age Always - 24 (Min/Max 22/29)
195 Hardware_ECC_Recovered 0x001a 099 099 000 Old_age Always - 18548112
196 Reallocated_Event_Count 0x0033 100 100 001 Pre-fail Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
202 Unknown_SSD_Attribute 0x0033 100 099 090 Pre-fail Always - 0