T1DEEP reports wrong CPU and nonexistent memory

[askaquestion]

Hi,

I recently bought a T1DEEP motherboard, 2x EPYC 7742, 8x 16GB ECC RDIMM memory and other parts. When I connect to the BMC and start the server with or without RAM I get the following results:

and

The reported CPU is wrong and I don't have such memory.
Am I doing something wrong?

 

[RolloZ170]

have got thought BIOS POST and sync to BMC ?
this inventory is updated after successfull POST by BIOS.
no POST = old data/parts from last boot...

 

[Dev_Mgr]

What RolloZ170 mentioned makes sense, as I know that Dell PowerEdge servers also don't update inventory till after POST finishes (that's when you will see on the screen where it is taking inventory), which could be the same with this brand (have to admit I'd never heard of T1DEEP till this post).

 

[askaquestion]

Its probably that, thanks.

 

[RolloZ170]

this behave is same on all vendors i know.
the BMC Firmware could read BIOS version out of the chip conntected to it, but this must not the chip the server boots from (dual BIOS support)