Swissbit N30M2P 4TB 2280 new gen3 -299$

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

MSameer

Active Member
May 8, 2025
268
193
43
It was there earlier but was removed at some point. I have seen it initially but was surprised when it was not there the 2nd time I checked.

I questioned my memory but seems it is still good :-D
 
  • Haha
Reactions: sprucestream

klui

༺༻
Feb 3, 2019
1,071
633
113
I got the drives. One still had partitions and it was used on a Ciena switch.

They're basically new: one had 512KB written, and the one that was a NOS had 64GB written.
 
  • Like
Reactions: EasyRhino

frsp_1

Member
Apr 13, 2018
67
85
18
New York, NY
I got mine but it had issues. A SMART test showed that it had a critical warning 0x04 (NVM subsystem). Maybe a bad cap or some other hardware issue... write and read seemed to work fine but I'm not going to risk it so I've sent it back. Seller was great about the return though.

Here is the SMART output:

smartctl 7.5 2025-04-30 r5714 [x86_64-linux-7.0.0-29-generic] (local build)
Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number: SFPC3T84M1AR4MT-I-YC-61O-ES1
Serial Number: AA000000000000000037
Firmware Version: ARR40002
PCI Vendor/Subsystem ID: 0x1dd4
IEEE OUI Identifier: 0x8c6078
Controller ID: 0
NVMe Version: 1.3
Number of Namespaces: 1
Namespace 1 Size/Capacity: 3,840,755,982,336 [3.84 TB]
Namespace 1 Utilization: 7,411,781,632 [7.41 GB]
Namespace 1 Formatted LBA Size: 512
Local Time is: Mon Aug 10 20:17:12 2026 UTC
Firmware Updates (0x14): 2 Slots, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg
Maximum Data Transfer Size: 64 Pages
Warning Comp. Temp. Threshold: 90 Celsius
Critical Comp. Temp. Threshold: 100 Celsius

Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 9.00W - - 0 0 0 0 0 0
1 + 4.60W - - 1 1 1 1 0 0
2 + 3.80W - - 2 2 2 2 0 0
3 - 0.0450W - - 3 3 3 3 2000 2000
4 - 0.0040W - - 4 4 4 4 15000 15000

Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
- NVM subsystem reliability has been degraded

SMART/Health Information (NVMe Log 0x02, NSID 0x1)
Critical Warning: 0x04
Temperature: 39 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 0%
Data Units Read: 2,391 [1.22 GB]
Data Units Written: 19,975 [10.2 GB]
Host Read Commands: 91,085
Host Write Commands: 156,007
Controller Busy Time: 3
Power Cycles: 6
Power On Hours: 0
Unsafe Shutdowns: 3
Media and Data Integrity Errors: 0
Error Information Log Entries: 0
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 39 Celsius
Temperature Sensor 2: 28 Celsius
Temperature Sensor 3: 39 Celsius

Error Information (NVMe Log 0x01, 16 of 256 entries)
No Errors Logged

Self-test Log (NVMe Log 0x06, NSID 0xffffffff)
Self-test status: No self-test in progress
No Self-tests Logged
 
  • Like
Reactions: abq, nexox and klui

klui

༺༻
Feb 3, 2019
1,071
633
113
A SMART test showed that it had a critical warning 0x04 (NVM subsystem). Maybe a bad cap or some other hardware issue... write and read seemed to work fine but I'm not going to risk it so I've sent it back.
A wise thing to do.
 
  • Like
Reactions: abq

Sacrilego

Now with more RGB!
Jun 23, 2016
221
310
63
2 of my 4 were DOA. I really needed the 4. Oh well, I'll have to make do with 2. Can't win them all.
 

noscoe30

New Member
Sep 30, 2019
9
4
3
2 of my 2 seem acceptable. But the serial number reported is nothing like the sticker. AA000000000000000XXX
 
  • Like
Reactions: klui