Supermicro X9SCM-F RAM problem

Discussion in 'Processors and Motherboards' started by Nate.W, Oct 19, 2019.

  1. Nate.W

    Nate.W New Member

    Joined:
    Oct 19, 2019
    Messages:
    1
    Likes Received:
    0
    I just received all of my parts to start my build and when testing everything before initial install, I receive 5 short beeps and 1 long beep. I have 4 sticks of 4gb of DDR3 DIMM Unbuffered installed. Since I'm receiving a memory beep code, I started only using 1 stick in DIMM1A slot only. Swapping them out to see if there was a bad stick of RAM. They all started up, waiting for the BOIs installation showed up on the screen. Then I moved to using DIMM1A, and DIMM2A slots and all work there as well. It seems like I only get the beep code when I add more RAM sticks in the motherboard. Is this a RAM problem or a motherboard problem? I'm new to building computers and this is my first build. I bought the motherboard and RAM off of eBay and I'm not sure if its something that I am doing wrong of if there is something wrong with the components.
     
    #1
Similar Threads: Supermicro X9SCM-F
Forum Title Date
Processors and Motherboards Supermicro x9scm-f from Ebay won't post if PXE selected and LAN2 ROM enabled Oct 2, 2019
Processors and Motherboards Supermicro x9scm-f with Asus hyper m2 x 4 ? Jan 25, 2018
Processors and Motherboards Supermicro X9SCM-F no longer booting May 24, 2017
Processors and Motherboards Supermicro X9SCM-F Powers Off Every 5 Minutes Jun 8, 2016
Processors and Motherboards Supermicro X9SCM-F Bios Password reset? Oct 15, 2015

Share This Page