Supermicro X9DRL-7F Mobo

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

skipcox

New Member
May 23, 2020
3
0
1
I have a Supermicro X9DRL-7F mobo which I want to set up in RAID 0 using 2 Silicone Power Ace A55 SSD Sata III drives. When I go into the BIOS to set them up it says they are non-raid disks.

Is there any way to convert them to RAID disks?

Thanks,

Skip
 

cesmith9999

Well-Known Member
Mar 26, 2013
1,417
468
83
You have to put them in a virtual disk. Are these ssd's attached to 5he sata connectors or to the sas ports?

Chris
 

cesmith9999

Well-Known Member
Mar 26, 2013
1,417
468
83
Then you would need to go into the bios to set the disks as a RAID (not AHCI or ATA) configuration. then upon next boot. there should be a new screen show up in the bios boot screens that would allow you to create the raid array.

Chris