Just put together a sm X9DRI-LN4F+ with single cpu and 2x ram dimms.
Only installed 1x v1 cpu, 2x matching ram dimms pulled from working system and vga cable to monitor.
On power on cpu fan runs, i get two beeps and a 30 sec pause then two beeps and a 10 sec pause and a bip.
Manual only mentions 5 short +1 long beep (mem eror), 5 beeps (con in/out error) or 1 beep (ready to boot).
My system displays different beep codes as above. No video out. Tried different ram, next stage i guess is take board out of case and try on bench.
Found some more error codes here:
And here:
But none seem to match beep pattern i get (did test with no ram and get 5+1 beeps; with one dimm 2 beeps then 2 bips followed by 30 sec pause the 2 beeps pause then 1 bip; 2 dimms 2 beep 30 sec pause then 2 beep then 1 bip).
I tried 3 x different sets of ram, all work on another system.
Maybe I need a AMI debug rx tool, but could be several weeks before i can source one via international post
Only installed 1x v1 cpu, 2x matching ram dimms pulled from working system and vga cable to monitor.
On power on cpu fan runs, i get two beeps and a 30 sec pause then two beeps and a 10 sec pause and a bip.
Manual only mentions 5 short +1 long beep (mem eror), 5 beeps (con in/out error) or 1 beep (ready to boot).
My system displays different beep codes as above. No video out. Tried different ram, next stage i guess is take board out of case and try on bench.
Found some more error codes here:
Supermicro BIOS POST error codes
AMI BIOS POST Codes for Supermicro C7/X9/X10/X11/B9/B10/B1/A1 Motherboards Download the PDF from one of the links below: http://download.aldo.com.br/pdfprodutos/Produto28318IdArquivo3087.pdf
support.dvsus.com
And here:
AMI BIOS Beep Codes Overview - Thomas-Krenn-Wiki-en
Most Thomas-Krenn Servers are equipped with Supermicro or ASUS motherboards with BIOS or UEFI Firmware from AMI. In case of initialization errors during startup, the so-called Beep Codes can help to analyze the underlying issue. In this article you will find information about the meaning of the...
www.thomas-krenn.com
But none seem to match beep pattern i get (did test with no ram and get 5+1 beeps; with one dimm 2 beeps then 2 bips followed by 30 sec pause the 2 beeps pause then 1 bip; 2 dimms 2 beep 30 sec pause then 2 beep then 1 bip).
I tried 3 x different sets of ram, all work on another system.
Maybe I need a AMI debug rx tool, but could be several weeks before i can source one via international post
Last edited: