SuperMicro X9DRD-7LN4F

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
M

mikehunt114

New Member
Sep 19, 2017
23
3
3
And here I was on my way here to post this deal. :p

I nabbed one at $120. Considered getting a second one at that price, or should have offered $100 each for two. Seller accepted my initial offer so fast it made me second guess myself...

If it's what it's supposed to be, these are hot prices IMHO. This is the board I singled out as my top pick.
 
M

mikehunt114

New Member
Sep 19, 2017
23
3
3
BLinux said:
does the onboard LSI 2308 chipset allow the SAS connectors to be used in IT mode?
Click to expand...
Manual says IR mode for this board (IT mode for the JBOD version), but IR can be used for pass through. So...not sure about IT mode. I'd hazard a guess that you could flash it.

EDIT: Google tells me this is easily done: Flash LSI 2308 to IT-mode on a SuperMicro X10SL7-F mainboard – Widodh

EDIT2: Even closer to home:
Flashing the LSI2308 on a SuperMicro X10SL7-F motherboard to IT mode: where is firmware version 16?
Flashing the LSI2308 on an X9SRH-7F to IT mode?

EDIT3: Download the latest firmware from Supermicro's site (ftp://ftp.supermicro.com/driver/SAS/LSI/2308/Firmware/IT/). There are instructions inside.

You get the idea, I'm done. :p
 
Last edited:
BLinux

BLinux

cat lover server enthusiast
Jul 7, 2016
2,672
1,081
113
artofserver.com
mikehunt114 said:
Manual says IR mode for this board (IT mode for the JBOD version), but IR can be used for pass through. So...not sure about IT mode. I'd hazard a guess that you could flash it.

EDIT: Google tells me this is easily done: Flash LSI 2308 to IT-mode on a SuperMicro X10SL7-F mainboard – Widodh

EDIT2: Even closer to home:
Flashing the LSI2308 on a SuperMicro X10SL7-F motherboard to IT mode: where is firmware version 16?
Flashing the LSI2308 on an X9SRH-7F to IT mode?

EDIT3: Download the latest firmware from Supermicro's site (ftp://ftp.supermicro.com/driver/SAS/LSI/2308/Firmware/IT/). There are instructions inside.

You get the idea, I'm done. :p
Click to expand...
thank you! placed my offer, waiting on response.
 
B

BlueFox

Legendary Member Spam Hunter Extraordinaire
Oct 26, 2015
2,088
1,504
113
whitey said:
Could these be used in a sc113 1U or is that asking too much?
Click to expand...
It will fit, but you're going to have issues with airflow on account of the location of CPU1 (and associated RAM slots) since normally those chassis don't have fans that far down (just blanks for cable passthrough to the front) and routing the SAS cables is going to be a real pain (and will impede airflow). I'd recommend against it.
 
F

Falt4rm

New Member
May 12, 2017
3
0
1
France
Waiting for answer at 130$ offer (2 boards).
Edit : My offer got accepted.
I could be wise to change title to Europe because even with import fees + shipment at 200€ it's a really good offer.

BTW there is only one left.
 
Last edited:
E

ehorn

Active Member
Jun 21, 2012
342
52
28
Seller had 42 units.... that was quick...

Edit.. apparently he has more. New listing is 130 bin + shipping.
 
Last edited:
T

trumee

Member
Jan 31, 2016
224
14
18
54
What are you guys buying this for? It is no good for a workstation due to the lack of X16 slot.
 
W

whitey

Moderator
Jun 30, 2014
2,766
868
113
41
I tired a lowball offer @ $100, no dice, didn't really need it but for $100 I thought I'd at least try to to play the 'how low can you go' game :-D

I lost lol
 
P

pmo

Member
Jan 29, 2017
81
11
8
Just got ship notification. The picture does match the X9, so I'm not worried about it.
 
F

frogtech

Well-Known Member
Jan 4, 2016
1,482
272
83
35
I hope they are all working as I doubt now they have any replacements to give.
 
You must log in or register to reply here.
Top Bottom