Supermicro server power comes, but nothing on screen.

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

Nancy

New Member
Jul 24, 2013
20
0
0
Hi, everyone.

I have refurbished 1U Supermicro Twin Server SC809T-980B (2 nodes), and the spec is below.

Each Node has:
Supermicro X7DWT-INF Server
2x Intel Xeon E5345 CPU
16GB RAM
LSI MegaRAID 8888-ELP RAID Card
4x 2.5" Hard Drive Caddy
SIMSO+ IPMI management card

Just as the title, power is on, but I cannot see anything on the screen. It is simply blank.
What should be done in this case?

Help me~
 

Nancy

New Member
Jul 24, 2013
20
0
0
I enabled VGA, and I had a chance to talk to one of the Super Solution technicians, and he handed me some recovery methods called "UEFI BIOS Recovery Instructions". So I followed the recovery steps but still nothing happened. The screen is still off. I contacted the seller explaining what's wrong. Do you have other opinion on this?