Supermicro SC846, How to get the PSU out?

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

trumee

Member
Jan 31, 2016
222
12
18
54
Hello,

I tried to push down the lever at the back of the PSU but still it would not come out. Is there anything else which needs to be pressed to pull the PSU out of the chassis?

Thanks
 

PigLover

Moderator
Jan 26, 2011
3,184
1,545
113
Try removing the rails on the PSU side of the chassis, at at least loosening the screws that keep them from sliding out of their retaining clips. Sometimes the screws holding rails to the chassis press on the PSU and effectively lock it into place.