Sun F40/F80 to Seagate WarpDrive firmware (RAID Mode)

Vit K

Member
Feb 23, 2017
83
28
18
Hello. Sorry for this question. But I got stuck on editing your SBR to have the Nytro PCI ID. It keeps sayin "WARNING: SAS address checksum error". Im really new to ubuntu and got stuck here
I hope you got it working last year ;) Warning can be ignored, seem to go with newer version of the utility. I successfully converted several F40 and F80 drives. There is a video explanation now on Youtube, google for Craft Computing F80 with ready to use files. Sadly, still can't reduce or disable over provision to get full capacity. Some people even suggest that actual size of the SSD is two times of rated capacity (ie F40 is actually 1 Tb flash)
 

krypticnexus

New Member
Apr 3, 2022
1
0
1
I also have got the iocstatus = 0004 and when i try and install my backup it says iocstatus = 0003.

Any advice would be great. I was following the video on the f80 i derped and used his split and not my own split that i had made.
 

ttt821

New Member
Jul 12, 2021
9
0
1
I also have got the iocstatus = 0004 and when i try and install my backup it says iocstatus = 0003.

Any advice would be great. I was following the video on the f80 i derped and used his split and not my own split that i had made.
you have bad FW image.
you have to get the 13.00.08 version FW ( XP6302-8B1536 Firmware Update Package (16.00.01.00) this versionwill not work.)
you can use any 2008 FW to host boot the controller.

here is the link for the 13.00.08 FW
NWD-BLP4-400 Firmware (13.00.08.00) | Seagate