Hi all!
New here and trying to figure out an issue I am having with passing through a 1650 Super.
It is replacing a 780 that was working just fine with a Windows 10 VM in 6.7u3.
After installing the new card, I went to toggle the passthrough on in the Webui and it just toggles all four nVidia devices on/off until the browser crashes.
It is strange to me that the device only shows up as a nVidia VGA device and doesnt have the model name, but being a newer card maybe that is expected.
BIOS settings for VT-d are confirmed on, I am passing through a NVMe drive to the host right now just fine.
I tried toggling it on, even though the webpage was 'glitching', restarted the server and it corrupted the ESXi OS and I had to do a clean install.
Not really sure what is going on at this point, any help would be greatly appreciated!
New here and trying to figure out an issue I am having with passing through a 1650 Super.
It is replacing a 780 that was working just fine with a Windows 10 VM in 6.7u3.
After installing the new card, I went to toggle the passthrough on in the Webui and it just toggles all four nVidia devices on/off until the browser crashes.
It is strange to me that the device only shows up as a nVidia VGA device and doesnt have the model name, but being a newer card maybe that is expected.
BIOS settings for VT-d are confirmed on, I am passing through a NVMe drive to the host right now just fine.
I tried toggling it on, even though the webpage was 'glitching', restarted the server and it corrupted the ESXi OS and I had to do a clean install.
Not really sure what is going on at this point, any help would be greatly appreciated!