STH Aeon Mining Pool Beta Access

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

pgh5278

Active Member
Oct 25, 2012
479
130
43
Australia
The pool access will only be to STH members. We also have pre-built docker containers that go directly to the pool so all you need is a wallet address and then add how much CPU you want to use and you can be off and running mining Aeon. .
Hello Patrick, I will be delighted to join this aeon pool. will have machine ready saturday OZ time.
Thanks Peter
 

Marsh

Moderator
May 12, 2013
2,644
1,496
113
I just move 4 nodes of dual e5-2660 v1 to STH pool.

dual E5-2660 v1 , running 2 x docker xmrig sth process

speed 2.5s/60s/15m 1400.8 1403.8 1402.7 H/s max: 1421.6 H
speed 2.5s/60s/15m 1398.7 1399.0 1399.2 H/s max: 1423.8 H

Could someone ( may be Klee ) verify my speed is normal?
 

Marsh

Moderator
May 12, 2013
2,644
1,496
113
Thanks for the link
Open compute server E5-2660 v1 x4 = 5590 H/s or 1397 H/s per CPU
My setup H/s looks OK
 

Klee

Well-Known Member
Jun 2, 2016
1,289
396
83
The ability to target NUMA nodes via Docker makes a real difference when mining Aeon. Compare this screenshot:

View attachment 6880

which was taken when I was running xmrig on bare metal with 20 threads per compute node to this one:

View attachment 6883

which was taken running two Docker instances per compute node, each with 10 threads. To jump from 2650H/s per compute node to 3020H/s is pretty darn impressive. Across the mining cluster, this translates to a free 8.8kH/s, which is just awesome.

Once configured correctly in docker I get the same as bare metal mining in xmrig IF you have the bare metal version configured correctly also.

~3085 H/s for two E5-2660 v1's

In bare metal the "max-cpu-usage": 75, setting in the config.json file needs to be changed to 100 for maximum performance for mining.

Also I found that if I run 1 core less than the "ideal" number per cpu I get about %10 better performance.
 
Last edited:
  • Like
Reactions: RBE

Klee

Well-Known Member
Jun 2, 2016
1,289
396
83
I just move 4 nodes of dual e5-2660 v1 to STH pool.

dual E5-2660 v1 , running 2 x docker xmrig sth process

speed 2.5s/60s/15m 1400.8 1403.8 1402.7 H/s max: 1421.6 H
speed 2.5s/60s/15m 1398.7 1399.0 1399.2 H/s max: 1423.8 H

Could someone ( may be Klee ) verify my speed is normal?
My Dual 2660 v1's running 9 cores per docker process.

[2017-10-20 03:00:34] speed 2.5s/60s/15m 1547.1 n/a n/a H/s max: 1546.6 H/s
2017-10-20 03:00:54] speed 2.5s/60s/15m 1535.9 n/a n/a H/s max: 1536.4 H/s