Last week play with my sx6012 , when use programmer clip on U5 (st24c32wp), I damaged the Resistor on R7 (which should be 0402 4.7k ohm) .
then resolid a 0603 4.7K ohm Resistor on R7 for replace , now switch report "fatal error" when start , linux and bash still work, I can login in os and bash etc.
error message are:
could anyone give some advise what to do next for repair the sx6012?
according error messages it seems related to i2c or fru error , maybe replace the st24c32wp or something else?
then resolid a 0603 4.7K ohm Resistor on R7 for replace , now switch report "fatal error" when start , linux and bash still work, I can login in os and bash etc.
error message are:
Code:
chad[5883]: [chad.ERR]: check_base_header(), fru_info.c:299, build 1: Unsupported fru info version of the base block fru_ver: 0, exp_fru_ver: 0x1
chad[5883]: [chad.ERR]: st_open(), subsystem.c:8165, build 1: Auto detect of the subsystem "" failed due to MLXI2C_UNSUPPORTED_FRU_INFO_VER
chad[5883]: [chad.ERR]: check_base_header(), fru_info.c:299, build 1: Unsupported fru info version of the base block fru_ver: 0, exp_fru_ver: 0x1
chad[5883]: [chad.ERR]: st_open(), subsystem.c:8165, build 1: Auto detect of the subsystem "" failed due to MLXI2C_UNSUPPORTED_FRU_INFO_VER
chad[5883]: [chad.ERR]: check_base_header(), fru_info.c:299, build 1: Unsupported fru info version of the base block fru_ver: 0, exp_fru_ver: 0x1
chad[5883]: [chad.ERR]: st_open(), subsystem.c:8165, build 1: Auto detect of the subsystem "" failed due to MLXI2C_UNSUPPORTED_FRU_INFO_VER
chad[5883]: [chad.ERR]: mi_opend(), mlx_i2c.c:727, build 1: mi_opend retry number 3 failed due to MLXI2C_AUTO_DETECT_FAILED
chad[5883]: [chad.ERR]: wrapper_mi_open: sysapi failure:[21] on mi_open 'MLXI2C_AUTO_DETECT_FAILED' flags mask:[105]
chad[5883]: [chad.ERR]: do_i2c_init_ha(), chad.c:2122, build 1: Error code 14004 (item not found) returned
according error messages it seems related to i2c or fru error , maybe replace the st24c32wp or something else?
Last edited: