I received Supermicro A1SAM-2750F (Avoton SOC) yesterday for a build I am doing.
I spend nearly 3 hours trying to bring up the IPMI Interface. No luck.
The BMC/IPMI Heartbeat LED is blinking green (So the board thinks status is normal)
The link LED of the dedicated IPMI Network Port is constantly lit amber (as I would expect).
The activity LED is blinking amber occasionally (as I would expect without substantial) traffic.
BIOS output:
IPMI Firmware Revision is 1.88
Status of BMC is "working"
But the IPMI interface wont get a IP assigned by the DHCP.
In addition to that it does not seem to be possible to set a static IP.
The BIOS accepts the input and continues, but I wasn't even able to ping the interface.
Can anybody help?
Would this be the expected behaviour if the previous owner had configured the "IP Access control" feature?
Looking forward to your suggestions.
I spend nearly 3 hours trying to bring up the IPMI Interface. No luck.
The BMC/IPMI Heartbeat LED is blinking green (So the board thinks status is normal)
The link LED of the dedicated IPMI Network Port is constantly lit amber (as I would expect).
The activity LED is blinking amber occasionally (as I would expect without substantial) traffic.
BIOS output:
IPMI Firmware Revision is 1.88
Status of BMC is "working"
But the IPMI interface wont get a IP assigned by the DHCP.
In addition to that it does not seem to be possible to set a static IP.
The BIOS accepts the input and continues, but I wasn't even able to ping the interface.
Can anybody help?
Would this be the expected behaviour if the previous owner had configured the "IP Access control" feature?
Looking forward to your suggestions.