I got a used A1SRM-2758F on ebay, as well as ebay ram with this following label:
8GB DDR3 PC3-12800 ECC UDIMM (Samsung M391B1G73BH0-CK0 Equivalent) Memory
The A1SRM-2758F supported memory lists that part:
Super Micro Computer, Inc. | Support | Resources
If I install either of the modules in the first slot (DIMMA1) then it detects and boots with 8GB. If I install the other identical 8GB module in the next slot (DIMMB1) I get the "no memory detected" BIOS beep sequence.
I think I've included all the important information. I am motivated to get this solved, so if there is anything else I can add, I'd be happy to find the information and add it.
thanks!
EDIT: Just tried the lastest BIOS revision. No luck. Also reset CMOS and BIOS settings to default.
EDIT2: Both DIMMs work in the first slot, but I cannot install both at the same time.
8GB DDR3 PC3-12800 ECC UDIMM (Samsung M391B1G73BH0-CK0 Equivalent) Memory
The A1SRM-2758F supported memory lists that part:
Super Micro Computer, Inc. | Support | Resources
If I install either of the modules in the first slot (DIMMA1) then it detects and boots with 8GB. If I install the other identical 8GB module in the next slot (DIMMB1) I get the "no memory detected" BIOS beep sequence.
I think I've included all the important information. I am motivated to get this solved, so if there is anything else I can add, I'd be happy to find the information and add it.
thanks!
EDIT: Just tried the lastest BIOS revision. No luck. Also reset CMOS and BIOS settings to default.
EDIT2: Both DIMMs work in the first slot, but I cannot install both at the same time.
Last edited: