I am setting up a proxmox cluster with ceph cluster for lab purpose with 4 x11ssh-ctf motherboard in UNAS nsc810A chassis (very small chassis and air vent is on the side of the chassiss and not at the back)
After turn on the rig without any case fan, I realized a few hot zone. Even with case fan on, the LSI3008 chip and X550 chip is still extremely hot. Another flaw I found is the motherboard's m2.pcie only support 2260 SSD length.
with my hotglue gun and few blower fans, I decide to enhance the board for better cooling.
Here are the results
And the temp has dropped significantly
Here is my guide on how to flash onboard lsi3008 to it mode
After turn on the rig without any case fan, I realized a few hot zone. Even with case fan on, the LSI3008 chip and X550 chip is still extremely hot. Another flaw I found is the motherboard's m2.pcie only support 2260 SSD length.
with my hotglue gun and few blower fans, I decide to enhance the board for better cooling.
Here are the results
And the temp has dropped significantly
Here is my guide on how to flash onboard lsi3008 to it mode
Last edited: