I have a SM X10DAC which includes the LSI SAS3008 raid controller. I would like to connect two Intel 750 1.2TB U.2 drives to the controller via the two LSI SFF-8643 ports and the Intel supplied SFF-8639 to SFF-8643 cables. After a failed initial attempt and subsequent additional research, it would seem that, at least in IR mode, non SAS/SATA end devices are incompatible with the 3008 SAS/SATA controller.
At this point I would like to determine whether flashing the LSI controller to IT mode might allow me to pass through the (2x) 4 pcie lanes directly to the SFF-8643 ports and at least get the drives up and running. If not, I suppose I'll join the crowd currently waiting for the x16 NVMe controllers to become available.
Thanks in advance!
-Craig
At this point I would like to determine whether flashing the LSI controller to IT mode might allow me to pass through the (2x) 4 pcie lanes directly to the SFF-8643 ports and at least get the drives up and running. If not, I suppose I'll join the crowd currently waiting for the x16 NVMe controllers to become available.
Thanks in advance!
-Craig