SATADOM power cable for Quanta D51PH-1ULH

[Cheddar Poster]

Does anyone know where to find SATADOM power cables (or SATADOMs w/power cable) that fit the motherboard headers on Quanta D51PH-1ULH? The ones that tend to ship with Supermicro and Innodisk SATADOMs are too small. See attached photo of the connector and the too-small power cable.

The number 1527 appears on the plastic receptacle and "J31 SATADOM PWR CONN_0" on the motherboard. There are two SATA data ports and two power headers on the motherboard even though the specs listed only one SATADOM port.

 

[Cheddar Poster]

Attaching two pics of the cable I'm looking for. I've only been able to find one unit and a search for the model number leads to sites without any in stock. Don't need the SATADOM (though I would buy more if I found them), just the cable, so hopefully these pics help identify it.

 

[Freebsd1976]

Attaching two pics of the cable I'm looking for. I've only been able to find one unit and a search for the model number leads to sites without any in stock. Don't need the SATADOM (though I would buy more if I found them), just the cable, so hopefully these pics help identify it.

DIY this Cable two years ago, on the disk side the connector is a1254 molex51146 , the other side I connect it to usb 5v and GND.
btw before i diy this cable, I got some useful information in STH forum, can’t remember now, but the connector still in my shopping cart on taobao.
Mb side is the first pic and disk side is the second ,no model number of mb side(maybe jst 1.25 3pin???)

 

[Cheddar Poster]

Thanks for the response! I'd like to avoid DIY if possible but that's just how I am.

 

[Gongman66]

Thanks for the response! I'd like to avoid DIY if possible but that's just how I am.

Did you ever find a cable? I have the same issue. Found this kit on amazon. https://www.amazon.ca/1-25mm-Connec...d=1672754713&sprefix=1254+molex,aps,69&sr=8-6

Cheers

 

[Cheddar Poster]

Did you ever find a cable? I have the same issue. Found this kit on amazon. https://www.amazon.ca/1-25mm-Connectors-Pre-Crimped-Pixhawk-Silicone/dp/B07S18D3RN/ref=sr_1_6?crid=3QPONC1VHNEK9&keywords=1254+molex&qid=1672754713&sprefix=1254+molex,aps,69&sr=8-6

Cheers

I haven't found the cable yet. Thanks for sharing that kit.

I probably won't use that kit because if something were to catch on fire it would be my fault.

 

[Gongman66]

I made one. Cost pennies.

 

[Cheddar Poster]

I made one. Cost pennies.

View attachment 28698View attachment 28699

I might try this myself after all. What was the connector part number you used for the motherboard side?

 

[musicalderp]

Don't know if it's worth anything to anyone but I made one too, using the connector kit linked above. Thanks guys!