Hello,
I have an LSI 9207-8i card which is detected by Arch Linux only when i have mpt3sas.msix_disable=1. The kernel version is 5.1.5. Is this a hardware issue with the card?
Card details are as follows:
Thanks
I have an LSI 9207-8i card which is detected by Arch Linux only when i have mpt3sas.msix_disable=1. The kernel version is 5.1.5. Is this a hardware issue with the card?
Card details are as follows:
Code:
#sas2flash -list
LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved
Adapter Selected is a LSI SAS: SAS2308_2(D1)
Controller Number : 0
Controller : SAS2308_2(D1)
PCI Address : 00:04:00:00
NVDATA Version (Default) : 14.01.00.06
NVDATA Version (Persistent) : 14.01.00.06
Firmware Product ID : 0x2214 (IT)
Firmware Version : 20.00.07.00
NVDATA Vendor : LSI
NVDATA Product ID : SAS9207-8i
BIOS Version : N/A
UEFI BSD Version : N/A
FCODE Version : N/A
Board Name : SAS9207-8i
Board Assembly : H3-25412-00H
Board Tracer Number : SV40220473