smartctl 6.5 (build date Mar 2 2021) [x86_64-linux-4.4.59+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Sandisk SATA Cloudspeed Max and GEN2 ESS SSDs
Device Model: SDLF1CRR-019T-1HA1
Serial Number: 202B5902
LU WWN Device Id: 5 001173 1008691fc
Firmware Version: ZR06RPA1
User Capacity: 1,920,383,410,176 bytes [1.92 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Jul 19 19:13:34 2023 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (20160) seconds.
Offline data collection
capabilities: (0x5d) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 1) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 033 033 000 Old_age Always - 58856 (0 252 0)
13 Lifetime_UECC_Ct 0x0012 100 100 001 Old_age Always - 0
32 Lifetime_Write_AmpFctr 0x0002 100 100 000 Old_age Always - 0
33 Write_AmpFctr 0x0002 100 100 000 Old_age Always - 100
170 Reserve_Erase_BlkCt 0x0032 100 100 000 Old_age Always - 18160
171 Program_Fail_Ct 0x0032 100 100 000 Old_age Always - 0
172 Erase_Fail_Ct 0x0032 100 100 000 Old_age Always - 0
175 Lifetime_Die_Failure_Ct 0x0032 100 100 000 Old_age Always - 0
178 SSD_LifeLeft(0.01%) 0x0012 100 100 000 Old_age Always - 8283
183 LT_Link_Rate_DwnGrd_Ct 0x0032 100 100 000 Old_age Always - 0
191 Clean_Shutdown_Ct 0x0032 100 100 000 Old_age Always - 46
192 Unclean_Shutdown_Ct 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 065 051 030 Old_age Always - 35 (Min/Max 13/49)
196 Lifetime_Retried_Blk_Ct 0x001b 100 100 010 Pre-fail Always - 0
211 Read_Disturb_ReallocEvt 0x0032 100 100 000 Old_age Always - 0
233 Lifetime_Nand_Writes 0x0032 100 100 000 Old_age Always - 2644032
235 Capacitor_Health 0x0032 100 100 000 Old_age Always - 0
241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 1269504
242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 1833600
244 Therm_Throt_Activation 0x0032 100 100 000 Old_age Always - 0
245 Drive_Life_Remaining% 0x0012 083 083 002 Old_age Always - 83
253 SPI_Test_Remaining 0x0012 100 100 001 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 4
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4 occurred at disk power-on lifetime: 58847 hours (2451 days + 23 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 00 4f c2 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d0 00 00 4f c2 00 00 00:00:00.003 SMART READ DATA
b4 00 00 00 00 00 00 00 00:00:00.003 SANITIZE DEVICE
b4 00 00 00 00 00 00 00 00:00:00.003 SANITIZE DEVICE
b4 00 00 00 00 00 00 00 00:00:00.003 SANITIZE DEVICE
b4 00 00 00 00 00 00 00 00:00:00.003 SANITIZE DEVICE
Error 3 occurred at disk power-on lifetime: 58847 hours (2451 days + 23 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 00 4f c2 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d0 00 00 4f c2 00 00 00:00:00.003 SMART READ DATA
b4 00 00 00 00 00 00 00 00:00:00.003 SANITIZE DEVICE
b4 00 00 00 00 00 00 00 00:00:00.003 SANITIZE DEVICE
b4 00 00 00 00 00 00 00 00:00:00.003 SANITIZE DEVICE
b4 00 00 00 00 00 00 00 00:00:00.003 SANITIZE DEVICE
Error 2 occurred at disk power-on lifetime: 58847 hours (2451 days + 23 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 00 4f c2 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d0 00 00 4f c2 00 00 00:00:00.003 SMART READ DATA
b4 00 00 00 00 00 00 00 00:00:00.003 SANITIZE DEVICE
b4 00 00 00 00 00 00 00 00:00:00.003 SANITIZE DEVICE
b4 00 00 00 00 00 00 00 00:00:00.003 SANITIZE DEVICE
b4 00 00 00 00 00 00 00 00:00:00.003 SANITIZE DEVICE
Error 1 occurred at disk power-on lifetime: 58494 hours (2437 days + 6 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 00 4f c2 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d0 00 00 4f c2 00 00 00:00:00.003 SMART READ DATA
b4 00 00 00 00 00 00 00 00:00:00.003 SANITIZE DEVICE
b4 00 00 00 00 00 00 00 00:00:00.003 SANITIZE DEVICE
b4 00 00 00 00 00 00 00 00:00:00.003 SANITIZE DEVICE
b4 00 00 00 00 00 00 00 00:00:00.003 SANITIZE DEVICE
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.