I am unable to update the driver on this card I bought from ebay. Can anyone help?
It appears to be a Cisco UCS 6400GB MLC Fusion ioMemory SX
HGST Virident Flashmax II 2.2TB MLC Solid State Flash Drive M2-LP-2200-2B | eBay
Here are results from:
fio-update-iodrive
fio-status -a
fio-pci-check -v
It appears to be a Cisco UCS 6400GB MLC Fusion ioMemory SX
HGST Virident Flashmax II 2.2TB MLC Solid State Flash Drive M2-LP-2200-2B | eBay
Here are results from:
fio-update-iodrive
fio-status -a
fio-pci-check -v
Code:
fio-update-iodrive -d /dev/fct0 fusion_4.3.4-20180621.fff
WARNING: DO NOT TURN OFF POWER OR RUN ANY IODRIVE UTILITIES WHILE THE FIRMWARE UPDATE IS IN PROGRESS
Please wait...this could take a while
Updating: [ ] ( 0%) /
Error: Firmware file does not contain firmware for device '/dev/fct0', part 'PA006274104'.
fio-status -a
Found 1 VSL driver package:
4.3.4 build 977 Storport Driver: loaded
Found 1 ioMemory device in this system
Adapter: ioMono (driver 4.3.4)
Cisco UCS 6400GB MLC Fusion ioMemory SX, Product Number:PFIO6400MSS, SN:FIO2049J02C
ioMemory Adapter Controller, PN:PFIO6400MSS
Product UUID:d8a07f09-c193-5f79-af24-d888f21363f6
PCIe Power limit threshold: 24.75W
PCIe slot available power: unavailable
Connected ioMemory modules:
fct0: 61:00.0, Product Number:PFIO6400MSS, SN:FIO2049J02C
fct0 Status unknown: Driver is in MINIMAL MODE:
The firmware on this device is not compatible with the currently installed version of the driver
ioMemory Adapter Controller, Product Number:PFIO6400MSS, SN:1646D0083
!! ---> There are active errors or warnings on this device! Read below for details.
ioMemory Adapter Controller, PN:PFIO6400MSS
Microcode Versions: App:0.0.12.0
Powerloss protection: not available
PCI:61:00.0
Vendor:1aed, Device:3001, Sub vendor:1137, Sub device:125
Firmware v8.7.6, rev 20140819 Public
Geometry and capacity information not available.
Format: not low-level formatted
PCIe slot available power: unavailable
PCIe negotiated link: 8 lanes at 5.0 Gt/sec each, 4000.00 MBytes/sec total
Internal temperature: 59.06 degC, max 62.51 degC
Internal voltage: avg 1.01V, max 1.02V
Aux voltage: avg 1.79V, max 1.80V
Rated PBW: 22.00 PB
Lifetime data volumes:
Physical bytes written: 0
Physical bytes read : 0
RAM usage:
Current: 0 bytes
Peak : 0 bytes
ACTIVE WARNINGS:
The ioMemory is currently running in a minimal state.
fio-pci-check -v
This utility directly probes the pci configuration ports.
There are possible system stability risks in doing this.
Do you wish to continue [y/n]? y
Root Bridge PCIe 137000 MB/sec needed max
PCI standard host CPU bridge
Bridge 0000:60:01.01 (61-61) (1022:1453)
PCI Express Root Port
Needed 4000 MB/sec Avail 4000 MB/sec
Current control settings: 0x2150
Correctable Error Reporting: disabled
Non-Fatal Error Reporting: disabled
Fatal Error Reporting: disabled
Unsupported Request Reporting: disabled
Payload size: 512
Max read size: 512
Current status: 0x0000
Correctable Error(s): None
Non-Fatal Error(s): None
Fatal Error(s): None
Unsupported Request(s): None
link_capabilities: 0x00003883
Maximum link speed: 8.0 Gb/s per lane
Maximum link width: 8 lanes
Current link_status: 0x00007082
Link speed: 5.0 Gb/s per lane
Link width is 8 lanes
ioDrive3 0000:61:00.0 (3001) Firmware 117378
Fusion ioMemory VSL4 Device
Current control settings: 0x2057
Correctable Error Reporting: enabled
Non-Fatal Error Reporting: enabled
Fatal Error Reporting: enabled
Unsupported Request Reporting: disabled
Payload size: 512
Max read size: 512
Current status: 0x0000
Correctable Error(s): None
Non-Fatal Error(s): None
Fatal Error(s): None
Unsupported Request(s): None
link_capabilities: 0x0000f082
Maximum link speed: 5.0 Gb/s per lane
Maximum link width: 8 lanes
Current link_status: 0x00001082
Link speed: 5.0 Gb/s per lane
Link width is 8 lanes
Current link_control: 0x00000040
Not modifying link enabled state
Not forcing retrain of link