Remove ONIE and install MLNX-OS

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

boliniak1

Member
Sep 28, 2018
57
18
8
Can somebody help with how to install MLNX-OS with ONIE installed on SN2xxx switch ? I have onyx-xxx.img file but it is not possible to install using onie-nos-install (this is not that format).

A.
 
  • Like
Reactions: haswelliris

boliniak1

Member
Sep 28, 2018
57
18
8
Yes I know these docs, it seems that I need to have onyx onie installer (so it is bin file) but I don't know how to create it from img onyx software file.
 

Rand__

Well-Known Member
Mar 6, 2014
6,626
1,767
113
IIrc MLX img file were just zip archives, maybe you can unzip it and check if it contains the installation binary?
 

boliniak1

Member
Sep 28, 2018
57
18
8
IIrc MLX img file were just zip archives, maybe you can unzip it and check if it contains the installation binary?
Yeah I did it, but now it is not there is tgz file and when you untar this one you have mount points of OS
 

necr

Active Member
Dec 27, 2017
151
47
28
124
.img has no install binary, you need to download the .bin from Mellanox.
 

vishone

New Member
Oct 16, 2019
12
1
3
I need this file too, it would be greatly appreciated if anyone would like to share
 

Marc_

Always a school day
Jul 22, 2022
66
10
8
I also need X86_64-3.6.5000-installer.bin if anyone has it? Got a couple of NOS switches but only ONIE installed and no S/C to get it :(
 
  • Like
Reactions: Lance Joseph

editmonkey

New Member
Jun 29, 2023
1
1
3
Hello - I'm also trying to get hold of this installer. Currently trying to get a 2700 (with Sonic on currently) to match our 2100 with MLNX / ONYX OS on it. Any help and / or links very very much appreciated @Lance Joseph or @vishone please...!!
 
  • Like
Reactions: Lance Joseph