I would like to measure the power through an ATX connector within 1-2% accuracy from 1W to 100W. Inexpensive is good but not an absolute requirement.
Can anyone recommend a way to do this other than constructing my own jig using a shunt resistor?
For reasons that are somewhat detailed I want to measure the power at the ATX connector rather than the 120V line.
Thanks in advance for any assistance --
Dave
Can anyone recommend a way to do this other than constructing my own jig using a shunt resistor?
For reasons that are somewhat detailed I want to measure the power at the ATX connector rather than the 120V line.
Thanks in advance for any assistance --
Dave