Raritan PX rack PDU firmware

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

jd456

New Member
Sep 16, 2020
11
13
3
I have purchased some nice switched individually outlet monitored rack pdus

My PDU is running firmware version 01.00.03

from this PDF file


1.00.nn MUST UPGRADE TO 1.01.nn BEFORE UPGRADING TO 1.3.1-nnnn (where n is a number)
• Single Phase Models running firmware versions 1.01.05/1.01.06:
o 1.1.5-6724/1.1.6-6889 MUST upgrade to 1.3.1-7530 directly BEFORE UPGRADING TO 1.3.5-7832
• All Other Models (from-> to)
o 1.2.1 ->1.3.1-7530
o 1.2.2 -> 1.3.1-7530
o 1.2.5 -> 1.3.5.7832
o 1.2.7 -> 1.3.5-7832
o 1.3.0 ->1.3.5-7832
o 1.3.1 ->1.3.5-7832

raritans site does not have the older versions of the firmware required for intermediate upgrades


so it looks like i need firmware
1.01.nn
1.3.1-nnnn
1.3.5-7832

I just cannot find these, has anyone any info on this?
 

tinfoil3d

QSFP28
May 11, 2020
878
403
63
Japan
I have 1.05.13 preinstalled on 0U DPXS20A-30L6 maybe I could have tried to extract it off the device somehow.
What's the problem you have with your initial firmware?
I can say this particular device had one problem, when eth link will go down for some time it won't come up, won't request DHCP. Over it's service life here (1 year so far) I had to reboot controller using the reset button on PDU. Otherwise it has uptime of close to 1 year now and it's polled over snmp all the time and controlled over snmp with no issues.
 

jd456

New Member
Sep 16, 2020
11
13
3
I have emailed support again and this time instead of saying they have no firmware avalable they game me this firmware archive:


This link contained everything apart from version 1.2, which was required before upgrading from 1.1 to 1.2.7
1.2 does exist in the internet archive. My versions went from 1.00.03 to 1.1, 1.2,1.2.7,1.3.1, 1.3.5, 1.5.4, 1.5.13 (latest release)



See also



 
Last edited: