Quanta LB6M port down

[Pierre Grothe]

Hi guys,

I'm new with these Quanta LB6M switches and I'm running into some issues. I connected two ports of each of my vSphere ESXi servers to the switch for my home lab.
At first, every port are working just perfect but after some time. The second port shuts down.
I tried using the "no shut" command on the down ports without any success.
I tried connecting the cables to a different port on the switch without success
I tried connecting a cable to a port that was active (previously connected to an active port on a different ESXi host) and the port gets shut immediately and comes back as soon as I reconnect the previous cable.
I verified that there was no MAC ACL, I disabled the spanning tree protocol. I don't where to look at now.

Thanks,

 

[fohdeesha]

get rid of fastpath

https://forums.servethehome.com/ind...-flash-to-brocade-turboiron-big-update.17971/

 

[Pierre Grothe]

get rid of fastpath

https://forums.servethehome.com/ind...-flash-to-brocade-turboiron-big-update.17971/

I might end up just doing that but my goal with that switch is just to do layer 2 but really fast. I can't believe that there is no way to re enable those ports.

 

[fohdeesha]

I can't believe that there is no way to re enable those ports.

Considering some of the buggy crap I've seen with that demo build of fastpath, that would be the least of my disbelief