I really need some help with my brand new Quanta LB4M that's on order.
I simply want to know if anyone can tell me the exact commands for doing a firmware upgrade and/or a firmware dump on this switch?
I see this HUGE manual and I kinda sorta understand most of what they say in order to upgrade but it's a little tough as I'm new to the Quanta.
I currently own an HP Procurve 2910al-24g and I was able to track down the commands to upgrade that one and using the cli wasn't really difficult and it was pretty straight forward, and they even had a web based interface that lets you upgrade from there as well. I imagine its very similar in nature to do the same thing on this switch, I'm just having a little trouble interpreting what they require in that enormous manual :S
Also does anyone know if this switch has a web based firmware upgrade menu? That would be great
If not, I can muddle through the cli interface and try to upgrade that way.
I'm also aware that if the upgrade process isn't done correctly, I can possibly brick my switch and I would really appreciate a proper/correct procedure to avoid that scenario
I'm totally ok with upgrading to a newer version of the factory firmware or even some other firmware from a switch that was re-branded and has better firmware on it. I just want to make sure I'm running the latest firmware (hopefully with web based config still intact) and get any of the benefit/fixes that are included.
If anyone knows of or has the latest firmware for this unit and can post it here, I and everyone that owns these, would be so grateful!
I found this:
Firmware Updating Procedures
and it could possibly be the process in which to upgrade the firmware despite it being for a different system, would this work?
Thank you all and anyone that can help, even a little!