Proxmox ZFS Pool GUI

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

Patrick

Administrator
Staff member
Dec 21, 2010
12,511
5,792
113
Proxmox VE Seems to have added this fairly recently I had a Proxmox VE 5.2 node that I did a dist-upgrade -y on for a new install.

I looked at an older Proxmox VE 5.2 machine and it was not there. Datacenter-> Node -> Disks and it now has various storage creation options. One of them is ZFS. You can create zpools directly via this GUI and monitor health status.Proxmox VE 5.2 ZFS Storage Screen.JPG
 
  • Like
Reactions: Kybber and T_Minus

MiniKnight

Well-Known Member
Mar 30, 2012
3,072
973
113
NYC
OMG upgrade and reboot and there it is! It even adds to Proxmox so you don't have to do that extra step

Options for RAID level are:
  • Single Disk
  • Mirror
  • RAID10
  • RAIDZ
  • RAIDZ2
  • RAIDZ3
This is GREAT. When did they add it?
 

Patrick

Administrator
Staff member
Dec 21, 2010
12,511
5,792
113
Yea. No destroy option, but they are going a good direction.
 

Patrick

Administrator
Staff member
Dec 21, 2010
12,511
5,792
113
I just looked at a Proxmox VE 5.2-5 machine that we added a few drives to. It did not have the ZFS/ LVM GUI.

upload_2018-9-30_15-17-24.png
 

laserpaddy

Active Member
Jul 17, 2017
197
61
28
out there
I just did the install and subscription as I am finding it easier than other platforms to learn on; since command line is not my best attribute.
Also I noticed with my x9drd supermicro board bios update they added a ton of fixes and bifurcation, I mention this because it was for the microcode updates wondering if other had noticed this as well.