Proxmox issue on grub boot

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

Albert Yang

Member
Oct 26, 2017
72
1
8
30
Hi,

I was wondering if someone could shed some light on the issue im having. currently running HP gen dl 380 gen 9 with HBA using p440ar. i installed with 4 disks 2tb the OS and it installs good. once it boots shows me the grub rescue. i put the bios in legacy mode so not sure why its saying rescue mode?

when i try ls i get this

hd0 (hdo,gpt3) (hdo,gpt2) (hd0,gpt1) (hd1) (hd2) (hd3) (hd4) (hd5) (hd6) (hd7) (hd8) (hd9)

Thank you
 

MiniKnight

Well-Known Member
Mar 30, 2012
3,072
973
113
NYC
I would try doing everything in UEFI if you're using a RAID controller.

Were the disks used previously?
 

Albert Yang

Member
Oct 26, 2017
72
1
8
30
Thanks for the reply, im running ZFS but using HBA mode, yes there were in RAID mode but i cleared it, i think its a uefi issue on ZFS even if i put the bios in legacy not sure why