Problem booting with Supermicro board

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

daniel1926

New Member
Mar 27, 2016
27
1
3
46
Hi All,

Earlier today, I made a change in the BIOS for my Supermicro X9DRI-LN4F+ so as to disable quiet boot.

Ever since, I have not been able to boot into windows. Initially, I could get as far as the pre-windows screen, but ever since, I have been stuck at the first system initializing screen. I get the usual couple of beeps that happen 20ish seconds after power on, but after that, it just sits there indefinitely.

I've read around online and it seems that all of the available information relates to this issue + an error code. I, however, do not have an error code. Has anyone else seen this before?

Below is my system:

2x E5-2670
X9DRI-LN4F+
2U 826A chassis
intel 3700 ssd systems drive
LSI 9261-8i
12 seagate 2TB SAS HDDs
192 GB DDR3 ECC Ram
 

daniel1926

New Member
Mar 27, 2016
27
1
3
46
I wasn't able to get into the BIOS. Ultimately, I popped the battery out and cleared the CMOS. Everything works fine now.