I am at a bit of a loss here. I have a pfsense peer to peer / site to site network going right now. It's showing up on both the client and server side. Minimal traffic received.
Server - UDP
Local: 10.0.10.0/23
Remote: 192.168.1.0/24
Tunnel: 192.168.254/24
Client - UDP
Local: 192.168.1.0/24
Remote: 10.0.10.0/23
Tunnel: 192.168.254/24
So where I'm confused here is why I cannot do ping 10.0.10.1 and see anything on the other end.
Firewall > Rules > OpenVPN has:
Action: Pass
Interface: OpenVPN
TCP/IP Version: IPv4
Protocol: any
Source and Destination both are set to any.
I have the same setup on both sides of the network. Any idea why this is not working? It did authenticate so that isn't the issue. This is the last bit I'd need before I'd be ready to colo it.
Server - UDP
Local: 10.0.10.0/23
Remote: 192.168.1.0/24
Tunnel: 192.168.254/24
Client - UDP
Local: 192.168.1.0/24
Remote: 10.0.10.0/23
Tunnel: 192.168.254/24
So where I'm confused here is why I cannot do ping 10.0.10.1 and see anything on the other end.
Firewall > Rules > OpenVPN has:
Action: Pass
Interface: OpenVPN
TCP/IP Version: IPv4
Protocol: any
Source and Destination both are set to any.
I have the same setup on both sides of the network. Any idea why this is not working? It did authenticate so that isn't the issue. This is the last bit I'd need before I'd be ready to colo it.