pfsense Build

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

macrules34

Active Member
Mar 18, 2016
407
28
28
40
I have an HP DL325 that I will be using for this build, I am looking for these NICs to be able to handle VLANs, I will be using this as a FireWall w/ VPN and a router. So I'am looking for recommendations on NICs:

1. I plan to use the 3 leftover on board NICs.
2. A 4 port 1GB NIC (Copper)
3. A dual port 10GB NIC (Optical)

I only have two expansion slots one full height and one half height.

All NICs MUST be able to do VLANs.
 
Last edited:

mmo

Well-Known Member
Sep 17, 2016
558
357
63
44
you can create vlan under pfsense and assign vlan to different nic ports.
 

macrules34

Active Member
Mar 18, 2016
407
28
28
40
Okay, What quad port 1GB NIC would you recommend and what 10GB NIC would you recommend?
 

macrules34

Active Member
Mar 18, 2016
407
28
28
40
So, I’m looking to use this as a firewall and router.

I need the 10GB to connect to my Cisco Nexus 5020 switch. I also need a port to connect to my 1GB network for general connectivity.