I have tried OI and both OmniOS with Napp-it, everything seems to be working okay but what's concerning me is that every time I check the drive status the Soft error count goes up?.
It's not linked to one drive as the Soft error rate goes up on all the drives at the same rate.
I have 2 pools, 1x Mirror with 2x HP Enterprise SATA drives and 1x RAIDz2 with 6x 5K3000's.
Anything connected to the motherboard, i.e. CDROM, SSD does not show any soft errors.
Apr 20 21:02:36 Solaris-SVR Error for Command: Error Level: Recovered
Apr 20 21:02:36 Solaris-SVR scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0
Apr 20 21:02:36 Solaris-SVR scsi: [ID 107833 kern.notice] Vendor: ATA Serial Number: ML0220
Apr 20 21:02:36 Solaris-SVR scsi: [ID 107833 kern.notice] Sense Key: Soft_Error
Apr 20 21:02:36 Solaris-SVR scsi: [ID 107833 kern.notice] ASC: 0x0 (), ASCQ: 0x1d, FRU: 0x0
Apr 20 21:02:38 Solaris-SVR scsi: [ID 107833 kern.warning] WARNING: /scsi_vhci/disk@g5000cca369c993e4 (sd2):
Found this: https://www.illumos.org/issues/1787
I'm at a loss to know how to stop this.
It's not linked to one drive as the Soft error rate goes up on all the drives at the same rate.
I have 2 pools, 1x Mirror with 2x HP Enterprise SATA drives and 1x RAIDz2 with 6x 5K3000's.
Anything connected to the motherboard, i.e. CDROM, SSD does not show any soft errors.
Apr 20 21:02:36 Solaris-SVR Error for Command: Error Level: Recovered
Apr 20 21:02:36 Solaris-SVR scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0
Apr 20 21:02:36 Solaris-SVR scsi: [ID 107833 kern.notice] Vendor: ATA Serial Number: ML0220
Apr 20 21:02:36 Solaris-SVR scsi: [ID 107833 kern.notice] Sense Key: Soft_Error
Apr 20 21:02:36 Solaris-SVR scsi: [ID 107833 kern.notice] ASC: 0x0 (), ASCQ: 0x1d, FRU: 0x0
Apr 20 21:02:38 Solaris-SVR scsi: [ID 107833 kern.warning] WARNING: /scsi_vhci/disk@g5000cca369c993e4 (sd2):
Found this: https://www.illumos.org/issues/1787
I'm at a loss to know how to stop this.
Last edited: