I trying to add some NVMe drives to a few HP DL380 Gen8 servers....
I bought an ASUS Hyper M.2 x16 Adapter Card and a couple of Corsair MP600 1TB NVMe drives, however i am only able to see a single disk in the OS. I attempted to add the Adapter into a desktop machine as well but i get the same problem.
I have tested the drives in different slots on the adapter, different machines (both desktops and servers) and regardless of where i put them only a single drive shows up. I am suspecting some kind of enumeration issue, possibly the PCIe port must be in a specific a specific mode, though i havent been able to find any such setting in the BIOS of the servers. I see some people mentioning bifurcate in order to split 16 lanes into 4x4x4x4 lanes so will have to look-into that.
Anyone know of a workaround to get the NVMe's working? I dont need to boot from them or have them in an array.
I bought an ASUS Hyper M.2 x16 Adapter Card and a couple of Corsair MP600 1TB NVMe drives, however i am only able to see a single disk in the OS. I attempted to add the Adapter into a desktop machine as well but i get the same problem.
I have tested the drives in different slots on the adapter, different machines (both desktops and servers) and regardless of where i put them only a single drive shows up. I am suspecting some kind of enumeration issue, possibly the PCIe port must be in a specific a specific mode, though i havent been able to find any such setting in the BIOS of the servers. I see some people mentioning bifurcate in order to split 16 lanes into 4x4x4x4 lanes so will have to look-into that.
Anyone know of a workaround to get the NVMe's working? I dont need to boot from them or have them in an array.