I have some Micron DDR4 NVDIMMs, PowerGEMs, and cables. I’m trying to get them working on a Supermicro X11SPL.
Everything seems to be working except for the actual saving process. When power is removed it looks like there is no power provided to the DIMMs.
I bought the cables from DigiKey since there are no “official” cables to be found anywhere but I suspect that the pin out of the cables I have may not be correct.
Does anyone have an official cable they could check for the correct wiring?
Thanks!
Riley
Everything seems to be working except for the actual saving process. When power is removed it looks like there is no power provided to the DIMMs.
I bought the cables from DigiKey since there are no “official” cables to be found anywhere but I suspect that the pin out of the cables I have may not be correct.
Does anyone have an official cable they could check for the correct wiring?
Thanks!
Riley