Hello
I ordered two pieces of 10 TB HGST drives from eBay, for use in a little workstation I bought from a used hardware sale in my university to run Windows.
The listing said "drives are taken out of unused NAS systems, tested and placed into antistatic bags".
I received them almost a month ago but only now got the part I needed for installing them (the machine is a Dell minitower) and I immediately booted into linux to see what smartctl can tell me.
Both disks have SMART attributes as if they were perfectly fine and practically unused. Attribute 9, Power_On_Hours said zero on both.
But one disk (serial ending in W1D) has a test log that says:
whereas the other (serial ending in 8JC) has an error log that says:
Does this mean that these are used datacenter disks that have had their SMART attributes reset? Or can there be any other explanation? Have these been powered on but unused? Or have the attributes 241 aka Total_LBAs_Written also been zeroed? Both had attribute 242 Total_LBAs_Read at 11238. Both have 100 % Helium left.
These were sold for around $220 plus taxes and postage, which in my case means $300 each. Is that a good price for a used datacenter HD? I know it would be a nice price for a NOS or unused one. So am I seeing something wrong? Or should I outright request a return? Or how much would you be honestly willing to pay for these?
The disk with the logged errors has this test log:
So seems like it too has been in use for longer than a year.
I have about a week to act on this. Should have acted quicker with testing these and ordering the tray for the second drive.
I ordered two pieces of 10 TB HGST drives from eBay, for use in a little workstation I bought from a used hardware sale in my university to run Windows.
The listing said "drives are taken out of unused NAS systems, tested and placed into antistatic bags".
I received them almost a month ago but only now got the part I needed for installing them (the machine is a Dell minitower) and I immediately booted into linux to see what smartctl can tell me.
Both disks have SMART attributes as if they were perfectly fine and practically unused. Attribute 9, Power_On_Hours said zero on both.
But one disk (serial ending in W1D) has a test log that says:
Code:
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short captive Completed without error 00% 41406 -
# 2 Short captive Completed without error 00% 41400 -
# 3 Vendor (0x70) Completed without error 00% 41290 -
# 4 Vendor (0x71) Completed without error 00% 41290 -
whereas the other (serial ending in 8JC) has an error log that says:
Code:
Error 15 occurred at disk power-on lifetime: 5027 hours (209 days + 11 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 f8 80 47 06 40 Error: UNC 248 sectors at LBA = 0x00064780 = 411520
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 d0 a8 45 06 e0 08 17d+04:26:46.013 READ DMA EXT
25 00 08 90 e0 b1 e0 08 17d+04:26:43.084 READ DMA EXT
25 00 00 90 dc b1 e0 08 17d+04:26:43.071 READ DMA EXT
25 00 00 90 d8 b1 e0 08 17d+04:26:43.058 READ DMA EXT
25 00 00 90 d4 b1 e0 08 17d+04:26:43.045 READ DMA EXT
Error 14 occurred at disk power-on lifetime: 5022 hours (209 days + 6 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 08 20 28 64 40 Error: UNC 8 sectors at LBA = 0x00642820 = 6563872
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 28 25 64 e0 08 16d+23:41:14.240 READ DMA EXT
25 00 00 28 21 64 e0 08 16d+23:41:11.723 READ DMA EXT
25 00 00 28 1d 64 e0 08 16d+23:41:11.721 READ DMA EXT
25 00 10 60 c2 ee e0 08 16d+23:41:11.715 READ DMA EXT
25 00 10 b8 d8 a6 e0 08 16d+23:41:11.707 READ DMA EXT
Error 13 occurred at disk power-on lifetime: 4946 hours (206 days + 2 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 90 a0 4d 9a 40 Error: UNC 144 sectors at LBA = 0x009a4da0 = 10112416
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 30 4c 9a e0 08 13d+19:50:34.574 READ DMA EXT
25 00 08 c0 14 96 e0 08 13d+19:50:30.311 READ DMA EXT
25 00 00 c0 10 96 e0 08 13d+19:50:30.309 READ DMA EXT
25 00 00 c0 0c 96 e0 08 13d+19:50:30.306 READ DMA EXT
35 00 08 68 89 4c e0 08 13d+19:50:30.306 WRITE DMA EXT
Error 12 occurred at disk power-on lifetime: 3298 hours (137 days + 10 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 00 10 1f 6a 40 Error: UNC at LBA = 0x006a1f10 = 6954768
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 10 1e 6a e0 08 7d+14:31:30.414 READ DMA EXT
25 00 08 58 4a d7 e0 08 7d+14:31:27.917 READ DMA EXT
25 00 00 58 46 d7 e0 08 7d+14:31:27.915 READ DMA EXT
25 00 00 58 42 d7 e0 08 7d+14:31:27.907 READ DMA EXT
25 00 08 30 fb 87 e0 08 7d+14:31:27.894 READ DMA EXT
Error 11 occurred at disk power-on lifetime: 3198 hours (133 days + 6 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 60 18 6b 64 40 Error: UNC 96 sectors at LBA = 0x00646b18 = 6581016
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 78 68 64 e0 08 3d+10:43:44.595 READ DMA EXT
25 00 08 68 3b 64 e0 08 3d+10:43:36.969 READ DMA EXT
25 00 00 68 37 64 e0 08 3d+10:43:36.966 READ DMA EXT
25 00 08 38 2e 95 e0 08 3d+10:43:36.955 READ DMA EXT
25 00 00 68 33 64 e0 08 3d+10:43:36.946 READ DMA EXT
Does this mean that these are used datacenter disks that have had their SMART attributes reset? Or can there be any other explanation? Have these been powered on but unused? Or have the attributes 241 aka Total_LBAs_Written also been zeroed? Both had attribute 242 Total_LBAs_Read at 11238. Both have 100 % Helium left.
These were sold for around $220 plus taxes and postage, which in my case means $300 each. Is that a good price for a used datacenter HD? I know it would be a nice price for a NOS or unused one. So am I seeing something wrong? Or should I outright request a return? Or how much would you be honestly willing to pay for these?
The disk with the logged errors has this test log:
Code:
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short captive Completed without error 00% 11223 -
# 2 Short captive Completed without error 00% 11217 -
# 3 Vendor (0x70) Completed without error 00% 11073 -
# 4 Vendor (0x71) Completed without error 00% 11073 -
So seems like it too has been in use for longer than a year.
I have about a week to act on this. Should have acted quicker with testing these and ordering the tray for the second drive.