NIC show disconnected (MB10-DATTO-07)

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

MarkKiss

New Member
Jan 20, 2018
3
0
1
38
I manage it working by select 1000mbps instead of auto (next week arrive new 10gbe switch I hope so it will work 10gbe)
 

digitaldizza

New Member
Oct 10, 2020
2
0
1
Where did you change the speed of the NICs from Auto? I am having the same issue as you were the NICs are there, but show disconnected within VMware on the console. If I boot the old Datto box up to Windows Server or even a Linux distro, the NICs work just fine.