New problem...m1015 crossflashed to sas2008

Discussion in 'RAID Controllers and Host Bus Adapters' started by costeen, Jan 8, 2019.

  1. costeen

    costeen New Member

    Joined:
    Dec 31, 2018
    Messages:
    16
    Likes Received:
    0
    got the flash done and been using it a while with 4 sas seagate 6tb drives and 2 satas all run by the controller...added a msata to my MB and now 2 of the seagates dont show up in windows file explorer. They show up in drive management but have no drive letters anymore. The msata was cloned from my boot drive and boots fine and seems to run ok. If i remove the msata and plug my original boot drive in the 6tb drives show back up...any ideas?
     
    #1
  2. costeen

    costeen New Member

    Joined:
    Dec 31, 2018
    Messages:
    16
    Likes Received:
    0
    SOLVED!...somehow it dropped the drive letters, I added the letters back in drive management and boom! all volume labels and data were there as if nothing ever happened.
     
    #2
Similar Threads: problemm1015 crossflashed
Forum Title Date
RAID Controllers and Host Bus Adapters [Solved] Install Windows7 on Raid0 on crossflashed D2607 Jun 4, 2017
RAID Controllers and Host Bus Adapters Crossflashed 9341-8i to 9300-8i - limited to 200MB/s!? Jul 5, 2016
RAID Controllers and Host Bus Adapters settings on a PERC H310 crossflashed to 9211-8i/IR May 25, 2015
RAID Controllers and Host Bus Adapters M5015 - crossflashed to 9260-8i LSI firmware issu Feb 19, 2015

Share This Page