Hi everyone! I am trying to figure out which PSU is compatible with Supermicro X10SRW-F. Initially Supermicro X10SRW-F with E5-2650L v4 and I got a SuperChassis 815TQ-R706WB which together they work perfectly fine. But since it was sitting in the middle of my appartment and it was too loud, I decided to find a ATX case for it and I found out it fits perfectly (for the most parts) with FRACTAL DESIGN DEFINE XL R2 BLACK (a case which my desktop motherboard was in it). So I bought a case for my own desktop and put the Supermicro X10SRW-F in FRACTAL XL R2 and since here is the manual of X10SRW-F, they wrote:
Although most power supplies generally meet the specifications required by the CPU, some are inadequate. In addition, the 12V 8-pin power connector located at JPWR1 is also required to ensure adequate power supply to the system.
I didnt hesitate. Now I tried it with be quiet SYSTEM POWER 9 600W as well as MSI MAG A750GL 750W, 80 Plus Gold. I can access IPMI, the LEDM1 (BMC Heartbeat LED) is blinking green, indicating that everything is fine, but when I click on the "Power On" button in IPMI of the Server, the button gets disabled, and it looks like it wants to turn on but nothing happens. After a few seconds a generic alert pops up with "Power on failed", the "Power On" enables again and it doesnt say anything else, there are no logs too! When I move the Motherboard back to the SuperChassis 815TQ-R706WB, everything goes back to normal and everything works!!
I am not 100% sure what is going on here. Has anyone faced this issue before? is there a way to find a way around this? any help is highly appreciated.
Although most power supplies generally meet the specifications required by the CPU, some are inadequate. In addition, the 12V 8-pin power connector located at JPWR1 is also required to ensure adequate power supply to the system.
I didnt hesitate. Now I tried it with be quiet SYSTEM POWER 9 600W as well as MSI MAG A750GL 750W, 80 Plus Gold. I can access IPMI, the LEDM1 (BMC Heartbeat LED) is blinking green, indicating that everything is fine, but when I click on the "Power On" button in IPMI of the Server, the button gets disabled, and it looks like it wants to turn on but nothing happens. After a few seconds a generic alert pops up with "Power on failed", the "Power On" enables again and it doesnt say anything else, there are no logs too! When I move the Motherboard back to the SuperChassis 815TQ-R706WB, everything goes back to normal and everything works!!
I am not 100% sure what is going on here. Has anyone faced this issue before? is there a way to find a way around this? any help is highly appreciated.