Maybe MS-01 doesn't work right with dual 48gb memory sticks... product page says max 64gb and those errors from rasdaemon can be voltage issues.
Minisforum MS-01 PCIe Card and RAM Compatibility Thread
- Thread starter Patrick
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
Yeh, I tried both, with the same results. Thanks for the reply anyway. Could some confirm me if the sfp ports are listed somewhere in the bios and where? If they are listed and I don't see them, def it's a hardware issue.
Such a same, I was too happy with the hardware until now...
Many of us are using 48gb sticks non problem, while not officially supported it works fine.
Oh, I see. Thanks. I don't know, they just disappeared after removing the pci card, I think I am going to ask for a replacement and wait for another 2 months for it
Yep, I tested the 2 sfp ports, with sfp rj45 and fiber modules, but still they doesn't appear. Before the pci removal I could saw the 2 ports also whitout any modules inserted. I hope Amazon make a repleacement instead of a refund.
Yeah they should, they always push replacement over refund. That is why I will only buy Chinese manufactured computers from Amazon in case they don't work/break etc.
Yes I didn't see anything after waiting a while - hard shutdown - spammed del - got UEFI after a wait - "fiddled with settings" (I really don't remember) - saved and exited - nothing changed - did it all again - it booted straight into a USB Windows install. Once I updated drivers and firmware under Windows, I installed Debian Trixie and haven't had any issues since.
I had another MS-01 random crash twice during the Windows install phase - it's been rock solid since.
I can't imagine non-techie people buying one of these and just expecting them to work (not suggesting that's you), I think they'll be disappointed. I don't think Minisforum is big on QC. Each of the three I've had delivered, have needed something to run reliably (for the whopping 3 weeks they've been running). I still they are cool for what they are... just kinda fiddly.
RAM not being seated well is definitely something that'll hinder your boot - for all 3 of mine, it was a fight to get the RAM fitted in correctly.
Bad RAM is the number one thing I fixed on clients PCs, once spinning drives were replaced by flash. I have the worst "luck" with Amazon supplied RAM. I "think" Crucial and others send factory seconds to Amazon.
I'd memtest/testmem/prime95 all new PCs, CPUs and RAM modules. Things happen, manufacturing anything is not perfect.
Fiddly is a good word for Minisforum QC
. I think there will be bios updates for ms-01 you can tell it was rushed. Things not working right and you email support and its like I don't know lol.Totally agree test everything because if you don't and the problem breaks something down the road and your outside the return window you have to eat the costs.
Just stuck 96GBytes of Crucial CT48G56C46S5.M16B1 on my one my MS-01s and no issues seen, did a quick ram test with a few vm's running in the background and a powershell script that can pick up any event log errors or warning. All seems to work well, although this was only a 20 minute test.
Eh… I’d much prefer if they swapped out the 10 gbps SPF ports for a mobile GPU (same lanes) and then expose another 2 Thunderbolt ports using the physical space previously occupied by the SPF ports so we have 2 x 32 gbps more PCIe bandwidth to do whatever with. The ability to have a PCIe AIC of our own choosing is one of MS-01’s primary selling points after all.
Hey All,
I noticed something weird with the X710s on the MS-01s, they dont seem to like the many varieties of passive copper dac cables that I have. I see error on my switch interface, the same copper dac's seem to work ok with my collection of x520 cards. Anyway I switched the copper cables in my MS-01s to Fiber active AOC and I no longer see errors.
I noticed something weird with the X710s on the MS-01s, they dont seem to like the many varieties of passive copper dac cables that I have. I see error on my switch interface, the same copper dac's seem to work ok with my collection of x520 cards. Anyway I switched the copper cables in my MS-01s to Fiber active AOC and I no longer see errors.
Their contact us page links to MinisforumClub, so I assume it's at least semi-official.
This post has a comment:-
Soon that i will get myne i have FS DACs, HPE DACs, UI DACs and HPE Tranceivers for Fiber so i will test with all of them and see what i get.