Minis forum MS-A2

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
W

wadup

Active Member
Feb 13, 2024
177
116
43
1.03 flashed with no issues. I did not have to pull my nvidia gpu to get bios screen.
 
F

flipper203

Member
Feb 6, 2024
61
16
8
thanks for the news. Any advice on bios setting to avoid having the fan go up and down but without limiting the CPU power too much ?
 
W

wadup

Active Member
Feb 13, 2024
177
116
43
turn on l0 and l1 on the aspm will let the devices use a lot less power when they aren't being used.

1775162035421.png
1775162049993.png
1775162079255.png

I use custom curve on fans

1775162136631.png
1775162163652.png

Just see what fans are being used system or ssd fan

1775162187363.png

My Unraid server is not very high usage but i like to keep cpu/nvme around 40 degrees. This is without throttling the cpu any.

1775162768190.png
1775162779207.png
 
  • Like
Reactions: name stolen
B

Beardmann

New Member
Jan 24, 2023
11
0
1
Hi there,
I have a MS-A2 with the 9 9955HX CPU BIOS 1.03 I have 2 x 32GB Micron DDR5 5600 memory and two NVMe disks installed in NVMe1 and NVMe3.
I have also installed a Dell branded Samsung PCI card PM1725a which should be capable of PCIe3.0 x8 connection... yet it connects at x1 and of cause I can see that the speed just isn't here... (about 8-900MB/sec, where we should be capable of much more).
In the BIOS I have tried to load optimized defaults, then change the SSDs to GEN4 and the PCIe slot to x8.
But still the card links up with x1...

Any other things you can tweak in the BIOS to allow the PCIe to link up at x8 as stated?
I have of cause tried the PCIe card in server, where it links up with x8 no problems...

Can the two NVMe disks "block" or cause the PCIe slot to "throttle" the speed down ?
I would think that the AMD CPU should have sufficient PCIe lanes to handle this?

Suggestions are welcome :)
 
W

wadup

Active Member
Feb 13, 2024
177
116
43
I have all the nvme's in use on gen4 and my nvidia card is running at 8 lanes. must be something with the dell pci card. maybe see if there is a firmware update to the pci card.
 
Y

Yuretz

New Member
Aug 9, 2025
5
0
1
Cant boot proxmox after bios update to 1.03. It just freezes after 3 seconds of boot without error. Dont know it what direction to dig.
 
W

wadup

Active Member
Feb 13, 2024
177
116
43
I know this sounds crazy but this has happened before. Try to flash the bios again see what happens.
 
W

wadup

Active Member
Feb 13, 2024
177
116
43
The other thing you could test is your ram or maybe pull your nvme's out and put another nvme in install windows or something simple and see if it boots.
 
A

Algent

New Member
Dec 9, 2025
4
2
3
wadup said:
New bios 1.03 released for CPU 9000


******************************************
* BIOS Release Notice *
******************************************
Release Date:
2026/03/31

BIOS Version:
1.03

BIOS Checksum:
6CF9

BIOS Description:
1.Update PI 1.0.0.0F
2.Update BM DMI to "Meigao Innovation Technology (Shen Zhen) Co., Ltd"
3.Hidden "Above 4G Decoding" and "move Powerlimit Setting" to Advance follow spec 2.4
Click to expand...
Did they remove it ? I get access denied right now.
 
TrevorH

TrevorH

Active Member
Oct 25, 2024
264
112
43
wadup said:
Here it is if anyone needs it.
Click to expand...
Given that at least one forum member reports that it has effectively bricked their machine and the manufacturer has removed it from view, probably wise to treat this as broken.
 
B

Brian Stretch

New Member
Jan 26, 2017
25
2
3
FWIW, I'm seeing the same issue. Proxmox starts to boot and hangs. I upgraded from 1.01 to 1.03 from EFI shell.
 
W

wadup

Active Member
Feb 13, 2024
177
116
43
ah your right there was a 1.02 for the 9000 but looks like they took down the link
 
You must log in or register to reply here.
Top Bottom