Memory Question

[pmo]

I have some 10600R-9-11-E2 dimms and some 10600R-9-13-E2 dimms. What's the difference between the 11 and 13? Will these work together? Would be on a Super micro board if that matters. Thanks.

 

[Evan]

Different sub timings
Should work ok, board should go as fast as the slowest installed, put the slower in lower number slots maybe as well.

(Disclaimer; I don’t know how SM reads and uses the memory profiles info on a dimm)

 

[pmo]

I haven't had a chance to test yet, but just wanted to comment that the RAM was pulled from dell servers. I looked up the dell part number, and see different timings being sold under the same part number, so it should be okay.