Mellanox CX3 Port Not Working

[gotsourcheeks]

I recently bought a HP 649281-B21 and followed this to flash to MCX354-FCBT
https://forums.servethehome.com/ind...net-dual-port-qsfp-adapter.20525/#post-198015

However, either I messed up one of my ports, or it was broken.

First Port

ethtool enp1s0
Settings for enp1s0:
        Supported ports: [ FIBRE ]
        Supported link modes:   1000baseKX/Full 
        Supported pause frame use: Symmetric Receive-only
        Supports auto-negotiation: Yes
        Advertised link modes:  1000baseKX/Full 
        Advertised pause frame use: Symmetric
        Advertised auto-negotiation: Yes
        Speed: Unknown!
        Duplex: Unknown! (255)
        Port: FIBRE
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: off
        Supports Wake-on: d
        Wake-on: d
        Current message level: 0x00000014 (20)
                               link ifdown
        Link detected: no

Second Port

ethtool enp1s0d1
Settings for enp1s0d1:
        Supported ports: [ FIBRE ]
        Supported link modes:   1000baseKX/Full 
                                10000baseKX4/Full 
                                10000baseKR/Full 
                                40000baseCR4/Full 
                                40000baseSR4/Full 
                                56000baseCR4/Full 
                                56000baseSR4/Full 
        Supported pause frame use: Symmetric Receive-only
        Supports auto-negotiation: Yes
        Advertised link modes:  1000baseKX/Full 
                                10000baseKX4/Full 
                                10000baseKR/Full 
                                40000baseCR4/Full 
                                40000baseSR4/Full 
        Advertised pause frame use: Symmetric
        Advertised auto-negotiation: Yes
        Speed: 10000Mb/s
        Duplex: Full
        Port: FIBRE
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: off
        Supports Wake-on: d
        Wake-on: d
        Current message level: 0x00000014 (20)
                               link ifdown
        Link detected: yes

Any ideas what's wrong with it?

 

[Freebsd1976]

i also have a qcbt right only one port work after crossflash