Hi!
I am using two HP-Mellanox ConnectX-3. The cards are working fine with 40 GbE and DACs. BUT: If I use QSFP+-Modules, they do not bring up a link - tested with:
- FS.com MLNX-Modules
- Arista UNIV Modules
Both modules are working fine in my ConnectX-3-cards, but not in the ConnectX-3. They simply show "no link".
I am using this firmware:
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX-6c3269847a3f4623b1ef56f5f5
Firmware 2.42.5000
fw-ConnectX3-rel-2_42_5000-649281-B21_Bx-CLP-8025-FlexBoot-3.4.752.bin
Do you have any idea on how to use the modules in the ConnectX-3 cards?
Thank you for your help
Stril
I am using two HP-Mellanox ConnectX-3. The cards are working fine with 40 GbE and DACs. BUT: If I use QSFP+-Modules, they do not bring up a link - tested with:
- FS.com MLNX-Modules
- Arista UNIV Modules
Both modules are working fine in my ConnectX-3-cards, but not in the ConnectX-3. They simply show "no link".
I am using this firmware:
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX-6c3269847a3f4623b1ef56f5f5
Firmware 2.42.5000
fw-ConnectX3-rel-2_42_5000-649281-B21_Bx-CLP-8025-FlexBoot-3.4.752.bin
Do you have any idea on how to use the modules in the ConnectX-3 cards?
Thank you for your help
Stril