MEGARAID SAS 9271-4I with cachevault

Discussion in 'RAID Controllers and Host Bus Adapters' started by Amr Rashad, Oct 26, 2018.

  1. Amr Rashad

    Amr Rashad New Member

    Joined:
    Oct 26, 2018
    Messages:
    1
    Likes Received:
    0
    Hello,

    I have a 1u server chassis 813MTQ-441CB and the remote hands technician couldn't install the parts:
    MEGARAID SAS 9271-4I
    LSI00297 / LSICVM01 (LSI MegaRAID CacheVault Accessory Kit)

    we used a riser card for the RAID card but according to the documentation we need a remote mount board for the CacheVault kit but there is no more room in the server chassis, my question is how can we install the CacheVault module in the server using the remote mount board or did we buy the wrong parts or is there some work around to install it ?

    Thanks in advance.
     
    #1
    Last edited: Oct 26, 2018
  2. funkywizard

    funkywizard mmm.... bandwidth.

    Joined:
    Jan 15, 2017
    Messages:
    543
    Likes Received:
    230
    You dont need a mount board. The supercap can be put more or less anywhere, loose. In your chassis, above one of the drives is a good spot for it.
     
    #2
Similar Threads: MEGARAID 9271-4I
Forum Title Date
RAID Controllers and Host Bus Adapters LSI MegaRAID SAS 9280-16i4e still useful? Jul 28, 2018
RAID Controllers and Host Bus Adapters X8DT6-F and second HBA MegaRaid 9240-4i ( CrossFlashing Help needed) Jul 7, 2018
RAID Controllers and Host Bus Adapters MegaRAID - how do I reimport a lost VD+CacheCade array? Feb 25, 2018
RAID Controllers and Host Bus Adapters MegaRAID M5015 - How to use non IBM drives? Feb 9, 2018
RAID Controllers and Host Bus Adapters Lsi Megaraid 9361-81 / ST4000NM0035 or ST4000NM0025 Jan 21, 2018

Share This Page