M5015 - crossflashed to 9260-8i LSI firmware issu

[jagelen]

Hi everyone.

Have been leeching a bit on your forum, but now i have run into a problem of my own.
I succesfully crossflashed my M5015 to 9260, using these guides:
http://www.servethehome.com/flash-ibm-serveraid-m5014-lsi-92608i-firmware/
SAS2108 (LSI 9260) based firmware files - Projects, Tools, Utilities & Customized INFs - LaptopVideo2Go Forums

But when i update through MSM to version 12.15.0-0205 and now it has reverted to being a M5015 (aka. slow-as-f***-booting-card).

Is there anyway to prevent this, have tried flashing it via Megarec too, using the old SBR too, but alas, no luck :/

I hope you guys might have a pointer or else i suspect i might have to run it with the old firmware.

/Jagel

 

[jagelen]

Sorry... I believe i found my answer in this thread after reading the comments to the guide:
https://forums.servethehome.com/index.php?threads/ibm-m5014-to-9260-reverts-back-to-5014.957/

I will be trying reloading the SBR after FW flash when i get home from work...

 

[jagelen]

I tried the procedure stated in comments, but it didn't seem to make a difference... It still presents as an M5015, and seem slow as ever :/