LUN unregistered

[markpower28]

Due to hardware issues, I had to move everything to a different system. Same model server, and move all HBA, NICs to the new server with the same PCI-E slot.

After import the pool everything is back online except LU shows unregistered.

I tried to run stmfadm import-lu, it shows meta file error.

Any suggestion is greatly appreciated.

I am using Solaris 11.3 with Nappit 17.01

 

[gea]

Are you using the napp-it menu Comstar > Logical units > Import
that handles the import?

on CLI:
Import is for filebased logical units.
If you use a zvol as base, use create like (use old or any GUID)
stmfadm create-lu -p GUID=600144f070cc440000004dd9c9460003 /dev/zvol/rdsk/vol

Synopsis - man pages section 1M: System Administration Commands

 

[markpower28]

Thank you Gea! That's exactly what I did. But it seems buggy. First, after import I did see tnew LUN GUID. After reboot the server, both new and old LUN show up.

The tracky part of the View. Maybe because I am using SRP as target. Even everything looks right on Napp-It. ESXi servers still shows path is dead until I reboot the servers.

Everything is back on line now.