LSI 9340-8i Crossflash Problems

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

GaveUp

New Member
Apr 11, 2016
19
5
3
I've got a pair of 9340' s I'm trying to crossflash with the IT firmware. Jumping J6 and flashing SAS9300_8i_it.bin works fine, but after removing the jumper and booting I get:

MPT BIOS Fault 10h
Booting in to efi shell and doing a -listall doesn't show the adapters. They will only show with J6 jumped.

I've tried searching for that fault code but haven't turned up anything. Any ideas on other things I could try or if it's the cards that are bad?
 

GaveUp

New Member
Apr 11, 2016
19
5
3
Chalk this one up to pebkac...

Left one card plugged in to the machine while off for about 20 minutes and one unplugged from the machine. Subsequent power on got rid of the error and I was able to complete the flashes and the cards are working.