LSI 9340-8i Crossflash Problems

Discussion in 'RAID Controllers and Host Bus Adapters' started by GaveUp, Jul 8, 2018.

  1. GaveUp

    GaveUp New Member

    Joined:
    Apr 11, 2016
    Messages:
    12
    Likes Received:
    1
    I've got a pair of 9340' s I'm trying to crossflash with the IT firmware. Jumping J6 and flashing SAS9300_8i_it.bin works fine, but after removing the jumper and booting I get:

    MPT BIOS Fault 10h
    Booting in to efi shell and doing a -listall doesn't show the adapters. They will only show with J6 jumped.

    I've tried searching for that fault code but haven't turned up anything. Any ideas on other things I could try or if it's the cards that are bad?
     
    #1
  2. GaveUp

    GaveUp New Member

    Joined:
    Apr 11, 2016
    Messages:
    12
    Likes Received:
    1
    Chalk this one up to pebkac...

    Left one card plugged in to the machine while off for about 20 minutes and one unplugged from the machine. Subsequent power on got rid of the error and I was able to complete the flashes and the cards are working.
     
    #2
Similar Threads: 9340-8i Crossflash
Forum Title Date
RAID Controllers and Host Bus Adapters doh! - Realized I had the wrong cables last night - LSI 9340-8i May 11, 2017
RAID Controllers and Host Bus Adapters Crossflashing LSI 9271-8i to Dell Perc H710P possible? Aug 22, 2018
RAID Controllers and Host Bus Adapters crossflash from 930-8i to 9460-8i? Jul 20, 2018
RAID Controllers and Host Bus Adapters X8DT6-F and second HBA MegaRaid 9240-4i ( CrossFlashing Help needed) Jul 7, 2018
RAID Controllers and Host Bus Adapters [Solved] Install Windows7 on Raid0 on crossflashed D2607 Jun 4, 2017

Share This Page