LSI 9267-8i IR Mode

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

Isith

New Member
Oct 11, 2020
1
0
1
I bought a LSI 9267-8i on Ebay but at the first start i got this error message:

BIOS Handshaking With The F/W. Wait (This Could Take Two Or Three Minutes)
Adapter at Baseport is not responding
No MegaRaid Adapter Installed


I tried to flash the recovery firmware: https://forums.servethehome.com/ind...lsi-2208-after-firmware-update-failure.13237/ but i have the same error.

megarec -cleanflash 0
(reboot)
megarec -m0flash 0 2208_16.rom


I tried a second method with this sbr: https://forums.servethehome.com/ind...267-to-sas2208-lsi-fw-recovery-success.29632/ but i have the same error.

megarec -cleanflash 0
(reboot)
megarec -writesbr 0 nec02.sbr
megarec -m0flash 0 2208_16.rom


Do you have any idea to come back with the original firmware?