I just got myself a dell-branded (TFJRW) LSI 9206-16e adapter. It has dual 2308 SAS controllers.
When i first plugged it in it had firmware: 13.00.60.00 and no bios. When booting my proxmox (debian) it printed warnings that temperature thresholds were exceeded (it was some 70 degrees hot since i did not have the correct airflow). I added a fan and the temperature was ok (~50 degrees).
They looked like this,
Jun 20 07:11:02 blue kernel: [ 26.615135] mpt2sas_cm1: Temperature Threshold flags 0 exceeded for Sensor: 0 !!!
Jun 20 07:11:02 blue kernel: [ 26.615253] mpt2sas_cm1: Current Temp In Celsius: 42
Jun 20 07:11:02 blue kernel: [ 26.638755] mpt2sas_cm0: Temperature Threshold flags 0 exceeded for Sensor: 0 !!!
Jun 20 07:11:02 blue kernel: [ 26.638873] mpt2sas_cm0: Current Temp In Celsius: 37
I went on and flashed latest P20 firmware (20.00.07) and the corresponding bios.
But now i cannot figure out how to get the HBA temperature? I removed the fan and waited a while but now it does not print the temperature warnings anymore.
Do any one know how i can get the temperature of the HBA?
Thanks!
When i first plugged it in it had firmware: 13.00.60.00 and no bios. When booting my proxmox (debian) it printed warnings that temperature thresholds were exceeded (it was some 70 degrees hot since i did not have the correct airflow). I added a fan and the temperature was ok (~50 degrees).
They looked like this,
Jun 20 07:11:02 blue kernel: [ 26.615135] mpt2sas_cm1: Temperature Threshold flags 0 exceeded for Sensor: 0 !!!
Jun 20 07:11:02 blue kernel: [ 26.615253] mpt2sas_cm1: Current Temp In Celsius: 42
Jun 20 07:11:02 blue kernel: [ 26.638755] mpt2sas_cm0: Temperature Threshold flags 0 exceeded for Sensor: 0 !!!
Jun 20 07:11:02 blue kernel: [ 26.638873] mpt2sas_cm0: Current Temp In Celsius: 37
I went on and flashed latest P20 firmware (20.00.07) and the corresponding bios.
But now i cannot figure out how to get the HBA temperature? I removed the fan and waited a while but now it does not print the temperature warnings anymore.
Do any one know how i can get the temperature of the HBA?
Thanks!